Product Detail

Product Detail

Bajaj Tiles as one of the leading manufacturer and exporters of glazed wall tiles, Digital Wall Tiles, Heavy Duty Industrial Tiles, Polished Porcelain Tiles (fully vitrified) based in the state of Gujarat, INDIA.

Bajaj Tiles as one of the leading manufacturer and exporters of glazed wall tiles, Digital Wall Tiles, Heavy Duty Industrial Tiles, Polished Porcelain Tiles (fully vitrified) based in the state of Gujarat, INDIA. We are equipped with imported machineries from Europe, employing advanced Italian technology to ensure international quality products. At present our production capacity is 75000sqm per day with different internationally well accepted designs. Our Range of products which includes...

1.. Ceramic Wall Tiles.
2.. Vitrified Floor Tiles.
3.. Heavy Duty Parking Tiles.

PRODUCT DETAIL


Our Key Product ranges are Digital Ceramic Wall Tiles, Parking Tiles and Vitrified Tiles. With the help of using latest Digital Printing, Roto Printing, and Flat Printing technology, we produce contemporary ceramic wall floor tiles in below given size format with various finishes like Satin, Glossy, Matt and Rustic. Parking Tiles is made of vitrified body which is widely used at heavy traffic (Parking) area.
WALL TILES SIZE PARKING TILES SIZE VITRIFIED TILES SIZE
300x600 mm 300x300 mm Ivory 605x605 mm Soluble Salt
300x450 mm 300x300 mm Terracotta 605x605 mm Double Charge
300x300 mm 300x300 mm digital Parking Tiles
250x400 mm
200x300 mm
SHADE/SIZE VARIATION ARE INHERENT CHARACTERISTICS TO CERAMICS. FIXING TILES WITH THICK BED MORTAR

  • Ample lighting should be provided. Each box should be spread & mixed on the floor to check for any variation. Mixing of tiles brings harmony to shade by avoiding obvious patches.
  • The area to be tiled should be free from all kind of dust/grime etc. Surface should completely smooth & flat.
  • Prior to fixing, tiles should be immersed in water for 15/20 minutes.
  • The sand & cement ratio should be 3:1 with 3 parts of sand to 1 part cement. The cement quality should preferably be Grade 53. Approximately 1 inch (25mm) completely flat thick bed of mortar, free of air voids should be spread up to the workable reach of mason.
  • Avoid rich application of neat cement/mortar (application of rich cement mortar/cement may lead to cracks developing on tiles due to cement pinch).Tiles should be fixed on the bed by sliding & tamping with wooden or rubber mallet. Spacers between the tiles should be between 2-5mm as per the usage & area of application.
  • Remove spacers after 24 hours from laying the til
  • Fill the joints with grouts as directed by Grout manufacturers

FIXING OF VITRIFIED/CERAMIC TILES WITH THIN BED MORTAR/ADHESIVES

  • Make sure the tiling area is clean, flat & free from dust & any loose debris. Ample lighting should be provided.
  • A thin bed of adhesive should be prepared, with approximately 2-3mm thickness
  • Always prepare adhesive according to the requirement, which can be consumed within the prescribed pot life.
  • Spacers should be placed between the tiles as per requirement (2-5mm) & should be removed after 24 hours.
  • Grouting should be done after the removal of spacers. Extra grout should be removed with the help of damp sponge.

Bajaj Tiles has always been pioneer to get equipped with latest technology. We have technology from Spain and Italy to produce best quality of tiles. Presently, we own 2 machines of World’s latest Digital technology and Rotocolor Printing technology to give better international design touch to the tiles. Besides this, we take care proper size cutting technologies and 4 long Kiln to provide proper temperature to the tiles.


We have well experience production and creative team for new product development. Thus, Bajaj Tiles has all the major technological strength to give more benefit and services at all ends.